MA Rowdy

  • MA Rowdy

MA Rowdy


Model #: MARW
MSRP: $299.00
Caliber .45LC/.410
Barrel Length 3"
Grip Material Rubber
Grip Size Standard
Length 5"
Height 3.75"
Weight 20 ounces
Ammo Capacity 2
Trigger Guard Yes
Action Single Action
Trigger Pull Weight 7lb.
Sights Front blade, fixed rear

Rowdy_Article.jpg
The compact, yet rough-looking, Rowdy is a new type of Bond Arm gun. It’s built with a 3″ barrel chambered for 45/410. Works best with smoothed lined holsters.

Features:

  • Stainless steel 3" barrel and frame
  • Compatible with all standard Bond Arms barrels
  • Rebounding hammer
  • Retracting firing pins
  • Cross-bolt safety
  • Standard Rubber Grip
  • Total Weight 20oz
  • Total Height 3 3/4"
  • Total Length 5"

Only Available in Massachusetts.

How did we get the price down so low?

Bond Arms has been well known for having a premium fit and finish to every gun we make.  To get to that level of aesthetic quality it takes a lot of time. We have taken that process and trimmed it down to create a gun that still has the robust qualities of our pre-existing models without all of the frills.
People have asked, are you using die-cast or pot metals? The answer is NO!! They are all the same grade of stainless steel like our current production models.
To give you an idea of our current process for manufacturing our current guns, we literally sand every part, then we spend a tremendous amount of time Polishing and hand finishing all these same parts to the Quality Finish that Bond Arms has always been known for.
Quality Control (QC) on our current guns nearly borders on excessive. Once the guns are shot and all functions work as they should, our QC guys then go to extreme measures to find every cosmetic flaw, scratch, ding, or pit or anything else that didn’t pass our inspection. This means the guns are sent back to be fixed, which in most cases, involves totally disassembling the gun to re-polish or fix any flaw that they may find. On occasion the same gun may go through that same process 3 to 4 times until it passes QC.
With the RoughNeck and Rough N Rowdy series, we do minimal cleanup and deburr to make sure there are no sharp edges and then we bead blast the finish. With this gun, part of the COOL FACTOR is that you can actually see the parting lines in the metal frame and trigger guard. As a final touch, we left in some of the swirly tool marks on the barrel just to give it that more ROUGH & TUMBLE Look. Also, since we are not sanding and polishing the frame, you may see tiny casting imperfections and rough areas that would never be acceptable for our current line of products.
This may not sound like much, but in comparison, we can build 4 to 5 RoughNeck’s in the same time as it takes to build ONE Texas Defender. That Is a Huge Amount of Savings on LABOR that allows us to pass those SAVINGS down to the consumer’s level, which for the First Time Ever has allowed us to have a new Bond Arms Hand Cannon available for under $300!
After this past NRA show, we saw that most of the higher volume sales of handguns were in the $300 to $350 and below range. When we came back from the show we set down and went part by part on our gun and by still using the same quality of parts we came up with ways to reduce cost on every part, but still, build a TANK Of a Gun….

 

To find a firearm dealer near you, CLICK HERE.

 

Gordon Bond Demonstrates the Cowboy and Texas Defenders
Caliber .45LC/.410 Barrel Length 3" Grip Material Rubber Grip Size Standard Length 5" Height 3.75" Weight 20 ounces Ammo Capacity 2 Trigger Guard Yes Action Single Action Trigger Pull Weight 7lb. Sights Front blade, fixed rear

Reviews

Be the first to submit a review on this product!
Review and Rate this Item
HAVE A QUESTION? ASK US!

HAVE A QUESTION? ASK US!

Full Name:  
Your Email:
Phone:
Question:
100 characters remaining
  Captcha
different image

Type the number above:
 

Related Products


This website uses cookies to ensure to ensure the proper functioning of our website, personalize content, and analyze our traffic.